Withdrawal Sleeves are often used to mount bearings with a tapered bore onto the cylindrical seat of stepped shafts. The sleeve is pressed into the bore of the bearing inner ring, which abuts a shaft shoulder or similar fixed components. The sleeve is located on the shaft by a nut or an end plate. Withdrawal sleeves give easier dismounting of the bearings, as the press fit of the bearing can be loosened with the aid of a Lock Nut applied to the withdrawal sleeve. KM or HM Lock Nuts with appropriate locking devices are suitable.

Our withdrawal sleeves are slotted and have an external taper of 1:12 except for the AH 240 and AH 241 series which have an external taper of 1:30 and are intended for using with wide bearings of 40 and 41 series.

With the same normal sleeves dimensions, Hydraulic Withdrawal Sleeves are recommended for shafts of large size sets because they are provided with oil injection gutters, making the assembling and disassembling much easier.

Lock nuts are not supplied with the withdrawal sleeves and must be ordered separately.

HOLK Bearing has more than 20 years of experience in the production of high-quality both European Metric and American Inch Standard Power Transmission products. 

We supply premium quality bearing adapter sleeves worth more than US$500,000 to a big famous European bearing company every year.

Our Adapter Sleeves range covers H 2 series, H 3 series, H 23 series, H 30 series, H 31 series, H 32 series, H 39 series, and Hydraulic Adapter Sleeves of HOH 23/HOH32 series, HOH 31 series, HOH 30 series, and HOH 39 series. The Withdrawal Sleeves range covers AH 2 series, AH 3 series, AH 23 series, AH 32 series, AH 22 series, AH 30 series, AH 240 series, AH 241 series, and AH 39 series, and Hydraulic Withdrawal Sleeves of AOH 22 series, AOH 23 series, AOH 30 series, AOH 31 series, AOH 32 series, AOH 39 series, AOH 240 series and AOH 241 series, etc.

Technical Details:

Product Name: Hydraulic Withdrawal Sleeves

Series: AOH 30, AOH 3000, AOHX 30, AOHX 3000

Taper: 1:12

Material: Carbon Steel

Roughness: below Ra 2.5

Surface Treatment: Anti-Rust oil; Blackening is available upon request

Packaging: Neutral, customized packaging is also available

Features: Easy to install at any position on shaft.

Drawing and technical data sheet of AOH 30, AOH 3000, AOHX 30, AOHX 3000 series Hydraulic Withdrawal Sleeves

Great care has been taken to ensure the correctness of the information contained in this publication but no liability can be assumed for any incorrect or incomplete data. The HOLK technical department reserves the right to final interpretation.

The roughness of HOLK's adapter sleeves and withdrawal sleeves is generally below Ra. 2.5.

HOLK's adapter sleeves and withdrawal sleeves are supplied with anti-rust oil on the surfaces. Blackening is available upon request.